Return Pins

Stahl return pins are fully machined from carbon steel utilizing an improved forged heat. 

Each return pin is furnished with two semi-finished hex nuts and two semi-finished hex jam nuts. 

For most molds mounted in 18 x 24 or smaller machines we recommend 1/2" diameter return pins. For molds being mounted in 30 x 30 and larger machines we recommend 3/4" diameter return pins. 

Please refer to the Typical Permanent Mold Assembly sheet and individual catalogue sheets for all your permanent mold component requirements.

Part Number	A	B	C	D	E	Ream Hole for Body	Unit Weight
98962	1/2	8	0.746	0.250	1/2 - 20 X 3	0.515 (33/64)	0.750
98964	1/2	10	0.746	0.250	1/2 - 20 X 3	0.515 (33/64)	0.750
98965	1/2	12	0.746	0.250	1/2 - 20 X 3	0.515 (33/64)	0.750
98966	1/2	14	0.746	0.250	1/2 - 20 X 3	0.515 (33/64)	0.750
98972	3/4	10	0.996	0.375	3/4 - 16 x 4	0.765 (49/64)	1.000
98971	3/4	12	0.996	0.375	3/4 - 16 x 4	0.765 (49/64)	1.000
98973	3/4	14	0.996	0.375	3/4 - 16 x 4	0.765 (49/64)	1.000